Hisense K1870599 Refrigerator Fan Motor 25W 12V B03081286

Special Price $30.60 Regular Price $40.95
In stock
Available Quantity:   27
SKU
K1870599

Product Description

The Hisense K1870599 Refrigerator Fan Motor 25W 12V B03081286 uses air to ensure the appliance has the same temperature. Its primary function is to move the internal fan blades, and ensure that there is adequate airflow throughout the evaporator and food compartments. The motor is powered by power and it turns the fan smoothly and efficiently with the assistance of the internal rotor and bearings. It is installed behind the evaporator, or in the freezer section, and is electrically connected to the control board. Consistent airflow provides better cooling, less frost accumulation and fresher and well-cooled air.
5.9"X7.6"X2.05"
Manufacturer
https://www.hnkparts.com/media/catalog/product/k/1/k1870599-hisense-hnkparts-1.jpg
Write Your Own Review
You're reviewing:Hisense K1870599 Refrigerator Fan Motor 25W 12V B03081286
Your Rating
Customer Questions
What maintenance is required for the Hisense K1870599 Fan Motor?

Check the motor blades and surrounding area for dust or debris. Ensure mounting screws are tight and the motor shaft spins freely. Clean airflow passages to prevent blockage. Verify consistent rotation during operation without any difficulty.

What are common issues with the Hisense K1870599 Fan Motor?

  • Fan not spinning properly.
  • Reduced airflow output.
  • Air distribution uneven.
  • Motor fails to start.

Installation Steps

Step1: Unplug the refrigerator to prevent electrical hazards.

Step2: Remove the back panel to access the fan motor.

Step3: Disconnect wiring connectors and remove mounting screws from the old motor.

Step4: Take out the old fan motor carefully.

Step5: Install the new motor and reconnect all wiring securely.

Step6: Replace the panel, plug in the refrigerator, and test airflow.